Wrapping up an Atari 2600RGB Install

Shortly after Tim Worthington released his 2600RGB kit this year I was chomping at the bit to install one as it is the first any only solution for obtaining RGB output from the Atari 2600!  While the Atari 2600 was my introduction to video games, any nostalgia I had for the console had always been hampered by its awful RF only output, full of noise in both the picture and sound.  A little over a decade ago I discovered some folks had created composite and S-Video mods, but they varied in picture quality and none stood out as being an ideal solution for the Atari 2600.

After acquiring an Atari 2600 to install the 2600RGB kit I was surprised by the extreme level of picture and audio noise when connecting the system to my HDTV using the stock RF switch output!  Thankfully the 2600RGB clears things up in both picture and sound departments.

I installed the kit in a "heavy sixer" several months ago, but hadn't finalized the output wiring until today!  This was in part due to the metal casing that surrounds the main circuit board.  Tim's installation guide for this particular revision of the Atari 2600 suggests using small wires to run underneath the metal casing, but I decided to take another approach!

2600RGB kit installed, but in need of output re-wiring.